5pcs/lot 1200W 20A DC Converter Boost Step up Power Supply Module IN 8 60V OUT 12 83V

5pcs/lot 1200W 20A DC Converter Boost Step up Power Supply Module IN 8 60V OUT 12 83V
  • Продавецprada-handbags-sale.us
  • Список ценUS $67.89piece
  • Продажная ценаUS $67.89piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,8 (237)

Oписание продукта

Module name: 1200W boost constant current module

Module nature: non isolated boost module (BOOST)

Input voltage:8-60V

Input current: 20A (real 20A input, Taobao many sellers almost all virtual standard, an inductance, 1 MOS power tube can reach 20A, killed I also don\'t believe)

Quiescent operating current: 15mA (12V L 20V, the output voltage is more Gao Jing current will increase)

Output voltage: 12-80V continuously adjustable

12-80V adjustable

Output current: MAX 20A more than 18A please strengthen the heat (and input, output voltage, the greater the difference between the output voltage of the smaller)

Constant current range: Max 20A

Output power: = input voltage *20A, such as: input 12V*20A=240W, input 24V*20A=480W,

Input 36V*10A=720W, input 48V*20A=960W, input 60V*20A=1200W

If you need more power, you can use two modules in parallel, such as output to 30A, you can use two modules in parallel,

The current of each module is transferred to 15A.

Working temperature: -40~+85 degrees (please strengthen the heat sink when the ambient temperature is too high).

Operating frequency: 150KHz

Conversion efficiency: the highest 95% (efficiency and input, output voltage, current, pressure difference)

Over current protection: there is a limit of power flow regulation, adjustable limit output current, current exceeds the current limit value, automatically reduce the output current to a minimum value of 5A, depending on the nature of the load current will be different.

Short circuit protection: there (input 20A fuse) double short circuit protection, the use of more secure.

Input reverse protection: No, if required, please enter the diode in the input string

Output anti - back irrigation: there is no need to add anti - diode for charging.

Installation method: 4 3mm screws

Connection way: the connection terminal avoid the welding output


Application range:

1, DIY a regulated power supply, 12V input can be, the output can be adjusted 12-80V.

2, for your electronic equipment, power supply, you can follow the system voltage to set the output value.

3, as a vehicle power supply for your laptop computer, PDA or digital products supply.

4, DIY a high power mobile notebook power supply: with large capacity 12V lithium batteries, let your books to go to where you can light.

5, the solar cell board.

6, to the battery, such as lithium battery charging.

7, driving high power LED lamp.

Input voltage range to choose: the factory default is 12-60v input