1500W 30A CC CV Boost Converter DC DC Step Up Power Supply Adjustable Module DC 10V 60V to 12V 90V DIY kit Electric Unit Modules

1500W 30A CC CV Boost Converter DC DC Step Up Power Supply Adjustable Module DC 10V 60V to 12V 90V DIY kit Electric Unit Modules
  • Продавецprada-handbags-sale.us
  • Список ценUS $25.07piece
  • Продажная ценаUS $25.07piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,9 (281)

Oписание продукта

 

The new CNC boost module, using advanced microprocessor control, abandon the transmission
 
The system of the potentiometer adjustment mode, the voltage and current precision adjustment using the button, you can
 
Constant voltage, constant current output, with working status indicator, real-time view the output
 
Voltage, current size and working status.
Features and advantages
 
U using advanced microprocessors, keys to accurately adjust the output voltage, current
U using high-quality power devices, with the external precision op amp composed of CV and CC loop, greatly improving the performance of the module
U using two 1mm two-wire wound large current inductor, the input using a 1000uF / 63V electrolytic capacitor, the output using two 470uF / 100V electrolytic capacitor, the output voltage quality is very good
U 4-bit high-brightness digital tube can be real-time display output voltage, current, manual switch can also be set, can also be set automatically
 
 
L Input voltage: 6V ~ 40V
L Input current: 15A (max)
L Output voltage: 8V ~ 80V
L Output current: 0 ~ 9.99A
L Voltage and current resolution: 0.01V, 0.01A
L Output power: 400W (max) Effective power P = Input voltage V * 10A
Match the fuse, please click:
 
 
Note: This point requires special instructions, the nominal 400W refers to the module under the specific operating conditions of the maximum power, in the case of different input voltage, the maximum output power by the input maximum current limit has declined. such as:
 
Input voltage is 12V: Maximum output power P = 12V * 10A = 120W
The input voltage is 24V: the maximum output power P = 24V * 10A = 240W
The input voltage is 40V: the maximum output power P = 40V * 10A = 400W
 
 
 
L conversion efficiency: up to 95% (input voltage, current and output voltage, current conversion efficiency)
L Short circuit protection: 15A fuse
L size (mm): 86 (long) * 75 (width) * 63 (high)
L Weight: 295g
 
 
There is a picture of the truth
Instructions:
 
 
1, the correct connection input, output, to ensure that the input voltage within the required range, is strictly prohibited reverse.
2, set the required voltage and current values, set the voltage and current values are as follows:
After power-on, the voltage setting is displayed by default. The format of the voltage value is "00.00", the unit is "V" and "12.34" means "12.34V". Press the "SET" button to switch to the current set value, the current value display format is "0.00A", the unit is "A", such as "1.23A" that "1.23A", press the button to increase the set value , Press the button to reduce the set value, short press the precise setting, long press can be quickly set. After the voltage value or current value changes, press "SET" key will display "----", that saved the current set voltage or current value. If you do not change the voltage or current value, press the "SET" key to switch to the current or voltage value.
 
3, press the "OK" button after the setting is finished.
 
4, the output state, press the button when the display voltage can increase the output voltage, press the button to reduce the output voltage, press the button when the display current value can increase the current set value, press the button to reduce Small current set value, short press the precise setting, long press can be quickly set. Output state short press "OK" button to switch the display voltage, current value, long press "OK" button for 3 seconds can automatically turn the wheel, press again to cancel the wheel again. In the wheeled state, press the button is invalid.
 
5, the output state, press the "SET" button to turn off the output. The following are the same as the "
 
6, power automatic output function on / off method: long press "OK" button, and then to the module power, digital display "- 0-" when the release button, if the release button after the digital display "- y-" It means that the automatic output function has been turned on. If the digital display "--n-" indicates that the automatic output function has been turned off after power on.
Show instructions:
00.00: voltage, 00.00 ~ 36.00V
0.000: current value, 0.000 ~ 3.000A
P.000, P0.00, P00.0, P000 .: Power value, unit W, the position of the decimal point changes the position as the power changes. For example: P.123 that 0.123W, P1.23 said 1.23W, P12.3 said 12.3W, P102. Said 102W
C.000, C0.00, C00.0, C000 .: Capacity value, in units of AH, where the position of the decimal point changes the position as the capacity changes. For example: C.123 that 0.123AH, C1.23 that 1.23AH, C12.3 said 12.3AH, C123. Said 123AH
- 0 -, - 1 -, - 2-: Special functions 0,1,2
--y-: Turns on special features
--n-: Turn off special features
 
Precautions:
1, after the output voltage and current speed is slow, this is the microcontroller in the control of its conversion speed, this does not affect the normal use, if you use a higher demand, please carefully shot.
2, long time high power work Please use the fan to strengthen the heat.
3, the module is a boost module, VOUT VIN. The output voltage is equal to the input voltage; if the output voltage is lower than the input voltage, the output output voltage is equal to the input voltage, which is a normal phenomenon, the output voltage is equal to the input voltage, In the use of the input voltage must be lower than the output voltage or electrical and electronic equipment, the rated voltage.
4, to power the power supply, please turn off the automatic output function, connect the input and output, and then press the "OK" button output, until the voltage rises to the set voltage, and finally open the appliance.
5, to charge the battery, please turn off the automatic output function, set the appropriate charging voltage and current, connect the battery, and then press the "OK" button output, you can charge the battery.
6, the module is the use of single-chip regulator of the constant current mode, the adjustment speed is relatively slow, suitable for charging and other current requirements of the relatively slow adjustment of customers.
Applications
 
 
1, DIY an adjustable output power supply, you can connect the input 6V, 12V, 24V, 36V power supply or battery, the output voltage can be adjusted between 8V ~ 80V arbitrary, the output voltage is higher than the input voltage.
 
2, boost charger, you can use 12V power supply to more than 12V battery charging, such as 24V battery, charging current can be adjusted.
 
3, for the electronic equipment power supply, as long as the voltage and current regulation to the electronic device rated voltage and current can make the equipment work properly. Note that the voltage of the front power supply must be lower than the rated voltage of the device.